1. Ed Grundtner
    January 13, 2017 @ 12:36 pm

    I am just starting out getting some machines my Dad Router and home made band saw which I have not used alot I have a Drill press a 10″ Table Saw (Milwaukee) and I have been makeing Wine Cadies of my own design (2,4,6 glass holders) I have started doing other projects as well I really liked the Table alot it turned out real nice I am triing to use the Router more what do you think of woodworking opportunity sites.


    • Martin
      August 30, 2017 @ 4:20 am

      I am Sharing my personal experience about one of the wood working plan i am using for my project. it contains all woodworking plans include workbench plans, shed plans, chair … blueprints and detailed instructions for building all kinds of wooden,
      check here to get all the wood working plans >> ( go2l.ink/wood )


  2. Jeremy
    January 13, 2017 @ 6:56 pm

    I have been combing YouTube for table ideas. I am looking to replace particle board peice of junk. This is in my woodworking abilities. Thanks so much for your channel, site, and plans. I will promote your channel every chance I get. Blessings,
    PS my 12 year old son loves the channel too and especially the micro jig ads.


    • omega
      January 31, 2018 @ 5:25 am

      That’s really awesome! He has got some easy cool steps that would take woodworking to the next level. I like surfing the web for some cool new ideas about woodworking and his posts are really amazing. My brother is a carpenter and he is a fan of this blog. He also came recently across this effective stuff which changed the way he saw woodworking, I am sharing it here:http://bit.ly/woodycraft
      Thanks again MereMortals.


  3. Rusty
    January 14, 2017 @ 2:10 pm

    I think you said it was one of your first times with the HVLP… how was your experience? Did your pancake compressor have enough to keep up with it?



  4. Owen Russell
    January 15, 2017 @ 4:44 am

    Great project!! I picked up a few good tips.


  5. Sandra Allsopp Phillips
    January 15, 2017 @ 12:22 pm

    Great video, did you make chairs to go with the table? if not will you be? Thanks


  6. Kev
    January 15, 2017 @ 5:38 pm

    Great job Steve, especially with your weather woes, couldn’t you have spoken to the Main Man to delay that wet stuff for a while, all in all, love the table, I think it is a premium job, well done. Thank you


  7. Firas
    October 19, 2017 @ 3:56 pm

    Hi Steve
    how much the thickness of the Edges ?


  8. Firas
    October 19, 2017 @ 4:11 pm

    Hi Steve,
    reference to my previous comment, the edge of of horizontal side .75 inch while the vertical side 2.8125
    which one is correct?


  9. Jason Latronica
    October 30, 2017 @ 1:32 pm

    Is there a way to taper the legs without buying a $200 jig?


  10. Andrew Austin
    November 27, 2017 @ 11:15 am

    Yes, search youtube for diy tapering jig!


Leave a Reply

Your email address will not be published. Required fields are marked *