Get my Curated List of The Most Affordable Woodworking Tools Send Me The Tool List

11 Comments

  1. Mickey
    January 20, 2017 @ 2:40 pm

    This is great! This is my next project.

    Reply

    • robert singh
      August 30, 2017 @ 4:16 am

      I am Sharing my personal experience about one of the wood working plan i am using for my project. it contains all woodworking plans include workbench plans, shed plans, chair … blueprints and detailed instructions for building all kinds of wooden,
      check here to get all the wood working plans >> ( go2l.ink/wood )
      .

      Reply

  2. Yayu
    January 20, 2017 @ 9:38 pm

    Steve, way you didn’t get one peace of wood 2/2 inch for the fence and did the hole for stopper?

    Reply

  3. Xavier Castell Cruz
    January 21, 2017 @ 9:19 am

    Sencillo y muy práctico , gracias S
    teve

    Reply

  4. Vic DePasse
    January 30, 2017 @ 6:11 pm

    When you move the fence does it remain square with the table? What keeps it square

    Reply

    • Paul Ellis
      January 31, 2017 @ 2:44 am

      Vic the fence need not be square to the table because you are drilling holes and not cutting the material you are drilling into. So the orientation need not be square. The only squareness you should be concerned about is between the table surface and the drill bit.

      Reply

  5. Polo Correa
    January 31, 2017 @ 8:49 am

    Just as a suggestion, if you happen to have space constraints on your wood shop like me, adding some quick release or toggle clamps to the bottom of the table (to clamp against the drill press table) can be helpful for quick removal and storage.

    Great project Steve, I really like it!

    Reply

  6. pepi
    February 3, 2017 @ 7:56 am

    merci… super comme toujour…

    Reply

  7. Mark
    February 10, 2017 @ 7:36 pm

    I built a drill table a few years ago.
    the one main problem is adjusting the table up and down, because the table is in the way of the crank handle for the adjustment. How do you deal with adjusting the height of the table?

    Reply

  8. Vernon Stedronsky
    May 14, 2017 @ 6:32 pm

    Probably the best woodworking videos I have ever seen. Love it.

    Reply

  9. Hammer drill
    September 21, 2017 @ 4:03 am

    Hey, this is very nice and informative article and please keeps posting the amazing article like this. but I have a question which machine is best for home

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *